The stand – type, two-way, bass-reflex loudspeaker system with a volume of 12 litres is made of a combination of natural wood and MDF. The front wall of the enclosure is made of pure wood with a thickness of at least 43 mm and at most 68 mm. The other walls are made of MDF boards, veneered with natural veneer. All edges of the front wall of the baffleboard are thoroughly rounded. The interior of the bass reflex enclosure consists of twelve open chambers made of MDF material (CSWA system) with a thickness of 25 mm. Three-millimetre-thick bitumen sheets combined with fabric are glued to all free walls of the enclosure. Thanks to this construction, the effective suppression of standing waves and the prevention of transmission of resonances to the baffle board was achieved. For damping, a damping material, Twaron® - Angel Hair, is used, freely distributed in all chambers. High-quality, gold-plated terminals for connecting bi-wiring or bi-amping are used to connect to the amplifier.

The filtration part contains high-quality passive components from Mundorf® or other manufacturers (according to customer requirements).

Oak, maple, walnut wood... and natural veneer according to the type of wood used on the front baffle are used for surface treatment. The choice of material for surface treatment is also possible according to the special requirements of the customer.

Power handling (IEC)
150W
Nominal impedancy
6Ω (min. 6,03Ω)
Sensitivity
87dB – 1W/1m
Frequency range
40Hz – 30 kHz (+0/- 3 dB )
Used drivers
Tweeter: AMT Mundorf – 1 piece
Middbass: 6" Morel – 1 piece
Recommended amplifier power
50W – 200W
Dimensions (W x H x D)
405 x 230 x 380mm
Weight
19kg / piece